Skip to content

14 wall-mounted and free-standing screen mounts are recommended to easily overcome desktop problems

There are 4 ways to install the computer screen stand. The previous article introduced the most common clip-on and perforated screen stand products , which are enough to be installed on 70% of the desktops in the market. But it is not suitable if your table just cannot drill holes, is too thick, or has a glass table top. The biggest feature of the wall-mounted and self-standing monitor brackets introduced in this article is that they can be installed in any desktop space without choosing a desk at all. The ULTRARM editorial team will focus on the number of screens that the product can support, and with the type of bracket arm, compile a list of the most common computer screen wall mounts and self-standing screen brackets on the market, allowing you to easily find the most suitable screen setting solution.

The products listed in this article can support the installation of up to 6 screens, and the corresponding products can be quickly found through the estimated number of screens to be installed. Before starting the introduction, please refer to the 5 basics when purchasing a monitor stand:

1. VESA mounting standard interface

The global screen or TV installation interface is formulated by the VESA Association. When designing the mechanism, manufacturers around the world will reserve 4 screw holes arranged in a square at the center of gravity on the back of the screen housing. The most common sizes for monitor mounts are 75 x 75 mm and 100 x 100 mm VESA mounts. The quickest way to confirm whether the monitor is VESA compliant is to check if there are 4 screw holes on the case on the back of the monitor.

2. Measure the screen size correctly

Please add border thickness to screen width and height. When the industry marks the size of the screen or TV, it usually writes the diagonal length of the "panel", excluding the frame. The same 32 -inch screen, the actual screen width and height may be different.

3. Confirm the weight of the screen

The base, tilting mechanism, and arms of the screen stand all have a weight limit. When purchasing, it is recommended to consider a product with a load capacity that is 2 to 3 kg heavier than the screen. In addition to safety considerations, it can also prolong the service life of the screen stand.

4. Advantages and disadvantages of wall-mounted installation

After drilling holes on the wall, lock the base to completely release the space occupied by the screen base on the desktop. Disadvantages : Causes permanent damage to the wall.

5. Advantages and disadvantages of self-standing installation

Like the stand provided by the original screen factory, it can be placed directly on the desktop, and it is suitable for almost all types of desktops. Cons: The screen has a small adjustable range and takes up a lot of desktop space.

Are you still not familiar with the specifications of the monitor stand? Please refer to the 11 questions you must read before buying a monitor stand .

The list is filtered according to the estimated number of screens to be installed and the type of bracket arm. If you already have a certain understanding of product specifications and how to purchase a screen bracket, please click on the number and method of screens to be installed to directly view the best-selling computer monitors in the international market. Stand or self-standing screen stand product introduction.

Number of screens

no arms

articulated arm

pneumatic arm

1 block

/

/

2 seats

/

3 seats

none

none

4 seats

none

none

6 seats

none

none

○ is wall-mounted; △ is self-standing

Armless Screen Stand

Only provide Y-axis vertical movement space, the screen will be arranged vertically along the pole, suitable for users who have limited desktop space but need to browse more information at the same time, the overall adjustability of the screen stand without arms is low, and when the pole is higher , the greater the weight of the resulting lever, it is not suitable for installing large screens.

Articulated arm monitor stand

At the same time, it provides a 2D moving space of the X+Y axis, extending left and right to add more arrangements and combinations, greatly improving the flexibility and practicability of settings. However, the articulated arm only has an extension function and cannot be aligned with screens of different brands/sizes. Even if the screens of the same model are used, the screens may not be aligned due to different lever weights.

Pneumatic Arm Monitor Mount

The screen can be adjusted freely in the 3-dimensional space, and the weight of the screen can be balanced by the force generated by the air pressure mechanism, and the screen can be easily moved to the ideal position. In addition to perfectly solving the problem of misalignment of different types of screens, the convenience of adjusting the height of the screen with one hand keeps the screen in the best line of sight. It is suitable for new large-size ultra-wide curved screens.

Reminder : The product models listed in this article are only for easy identification of product types, not absolutely suitable for your working environment and screen. By using 2 types of screen brackets together, more screen configuration requirements can be met. For example : use 2 types of dual monitor stand without extension arms to achieve a working environment with 4 monitors.

Computer Monitor Wall Mount Selection Guide

When purchasing a computer monitor wall mount, in addition to making sure that the weight, size and VESA interface of the monitor meet the product specifications, it is not easy to remove the base after it is locked on the wall, so three issues must be carefully considered:

1. Wall material

The base of the common computer monitor wall mount on the market is fixed by 2 to 3 sets of plastic geckos and screws. The overall load capacity of the base is about 50 kg (monitor + wall mount). It is suitable for wooden walls, brick walls and cement walls.

2. Table Depth

Affects the comfort of viewing the screen. The recommended distance is the length of the arm extension. The measurement method is to extend the arm forward after sitting down, and the middle finger just touches the screen, which is the most ergonomic screen placement. If the desktop is deep, it is recommended to choose a joint or pneumatic arm style with the function of extending the screen.

3. Screen position adjustment

The reason for choosing to upgrade the screen stand is not only to obtain a more spacious and tidy desktop space, but also to raise the screen and make the working environment more comfortable. Due to the difficulty in moving the wall-mounted base, the air-pressure arm style is used to facilitate the adjustment of the screen position at any time, and to choose the installation position of the base more flexibly.

Example of a single-screen armless stand product

Computer Monitor Wall Mount Single Monitor No Arm Bracket Product Example

Brand Mount-It! | Model MI-2829

Supported Screen Sizes

19 to 32 inches

Support screen weight (calculated separately)

1 to 20 kg

VESA standard mounting interface

75x75 mm to 100x100 mm

VESA adjustment function

Tilt: 12°

Horizontal rotation: 30°

Install the base

2 sets of plastic geckos and screws

The shortest distance between the screen and the wall

6 cm

vertical screen setup

none

Source : 2021/6/30 retrieved from mount-it.com

Single screen joint arm support product example

Computer Monitor Wall Mount Single Monitor Jointed Arm Bracket Product Example

Brand VIVO | Model MOUNT-VW01M

Supported Screen Sizes

13 to 27 inches

Support screen weight (calculated separately)

1 to 20 kg

VESA standard mounting interface

75x75 mm to 100x100 mm

VESA adjustment function

Tilt: 17°

Horizontal rotation: ±45°

Install the base

2 sets of plastic geckos and screws

The shortest distance between the screen and the wall

5 cm

The longest distance between the screen and the wall

26.5 cm

vertical screen setup

none

Source : 2021/6/30 retrieved from vivo-us.com

Product example of dual screen joint arm support

Computer Monitor Wall Mount Dual Monitor Joint Arm Bracket Product Example

Brand StarTech | Model MOUNT-VW01M

Supported Screen Sizes

13 to 24 inches

Support screen weight (calculated separately)

1 to 5 kg

VESA standard mounting interface

75x75 mm to 100x100 mm

VESA adjustment function

Tilt: ±15°

Horizontal rotation: ±15°

Install the base

4 sets of plastic geckos and screws

The shortest distance between the screen and the wall

16.5 cm

The longest distance between the screen and the wall

58.5 cm

vertical screen setup

Can

Source : 2021/6/30 retrieved from vivo-us.com

Product example of single-screen pneumatic arm support

Computer Monitor Wall Mount Single Monitor Air Pressure Arm Bracket Product Example

Brand HUANUO | Model ‎HNWSS1

Supported Screen Sizes

13 to 32 inches

Support screen weight (calculated separately)

1 to 8 kg

VESA standard mounting interface

75x75 mm to 200x200 mm

VESA adjustment function

Tilt: ±35°

Horizontal rotation: ±90°

Install the base

3 sets of plastic geckos and screws

The shortest distance between the screen and the wall

10 cm

The longest distance between the screen and the wall

46 cm

vertical screen setup

Can

Barometric Arm Height Adjustment Range

30 cm

Source : 2021/6/30 retrieved from huanuoav.com

Product example of dual-monitor pneumatic arm support

Computer Monitor Wall Mount Dual Monitor Air Pressure Arm Bracket Product Example

Brand HUANUO | Model ‎HNWDS1

Supported Screen Sizes

13 to 27 inches

Support screen weight (calculated separately)

1 to 8 kg

VESA standard mounting interface

75x75 mm to 100x100 mm

VESA adjustment function

Tilt: ±45°

Horizontal rotation: ±90°

Install the base

3 sets of plastic geckos and screws

The shortest distance between the screen and the wall

10 cm

The longest distance between the screen and the wall

53 cm

vertical screen setup

Can

Barometric Arm Height Adjustment Range

32 cm

Source : 2021/6/30 retrieved from huanuoav.com

Summary of purchase of computer screen wall mount

Due to the influence of usage habits, there are fewer product types of wall-mounted computer monitor brackets. If you need to combine more than one screen, you need to use multiple product combinations to achieve it. Although there are fewer types of products, it is more and more common to install wall-mounted products in personal rooms. Through the functions of height adjustment and horizontal rotation, the screen that was originally used on the desktop can be turned to face the bed for entertainment when needed. One screen Achieve two purposes at the same time, very convenient and save space.

Free Standing Monitor Stand Selection Guide

The same design as the bracket provided by the original screen factory, the self-supporting screen bracket can be used directly instead of the original bracket regardless of the type of table. When choosing a suitable product, in addition to paying attention to the weight and size of the screen and whether the VESA interface conforms to the specifications of the self-supporting screen stand, because of the nature of the stand base, you need to pay attention to 3 reminders when using it:

1. When moving the screen, you need to fix the base by hand

Unlike the other three installation methods, which force the base to be fixed to the desktop (wall), the self-supporting base only relies on the weight and center of gravity to balance the weight of multiple screens to keep the stand stable.

2. Maintain the balance of the left and right screens

When using the articulated arm to extend the screen to the left and right, please use a screen of the same brand, size and weight first to maintain high stability and avoid the problem of height asymmetry between the left and right screens.

3. Avoid Hyperextending Your Arms

Excessive extension resulting in a shifted center of gravity increases the risk of the monitor stand tipping over. Although the flexibility of using a self-standing screen stand at a fixed point is lower than other installation methods, the self-standing base has the highest adaptability to placement, can be used on any flat ground or desktop, and is quite convenient to move.

Example of a single-screen armless stand product

Self-standing monitor stand, single monitor, no arms, stand product example

Brand Hemudu | Model HT05B-003

Supported Screen Sizes

27 to 43 inches

Support screen weight (calculated separately)

1 to 35 kg

VESA standard mounting interface

50x50 mm to 200x200 mm

VESA top position

60 cm

VESA adjustment function

Tilt: 25°

Horizontal rotation: ±45°

vertical screen setup

Can

Source : 2021/6/24 retrieved from amazon.com

Product example of single-screen pneumatic arm support

Self-standing monitor stand, single monitor, air pressure arm, stand product example

Brand WALI | Model GSMF001

Supported Screen Sizes

13 to 27 inches

Support screen weight (calculated separately)

1 to 10 kg

VESA standard mounting interface

75x75 mm to 100x100 mm

VESA top position

32 cm

VESA adjustment function

Tilt: ±90°

vertical screen setup

Can

Single arm extension length

29 cm

Source : 2021/7/1 retrieved from walielectric.com

The only remaining self-supporting air pressure arm screen stand on the market, the main selling point is the use of touch screens, the overall center of gravity is designed to be low, and the base is aggravated by steel plates, so that the air pressure arm can maintain a certain grip when moving.

Dual Screen Armless Stand Product Example

Self-Standing Monitor Stand Dual Monitor Armless Stand Product Example

Brand Hemudu | Model HT05B-002

Supported Screen Sizes

13 to 34 inches

Support screen weight (calculated separately)

1 to 20 kg

VESA standard mounting interface

50x50 mm to 200x200 mm

VESA top position

74 cm

VESA adjustment function

Tilt: 25°

Horizontal rotation: ±50°

vertical screen setup

Can

Source : 2021/6/24 retrieved from amazon.com

Product example of dual screen joint arm support

Self-standing monitor stand Dual monitors Articulating arm Stand product example

Brand VIVO | Model STAND-V002F

Supported Screen Sizes

13 to 27 inches

Support screen weight (calculated separately)

1 to 10 kg

VESA standard mounting interface

75x75 mm to 100x100 mm

VESA top position

45 cm

VESA adjustment function

Tilt: ±90°

Horizontal rotation: ±180°

vertical screen setup

Can

Single arm extension length

37 cm

Source : 2021/7/1 retrieved from vivo-us.com

Three-screen joint arm stand product example

Self-standing monitor stand Three monitors Articulating arm Stand product example

Brand WALI | Model MF003

Supported Screen Sizes

13 to 24 inches

Support screen weight (calculated separately)

1 to 10 kg

VESA standard mounting interface

75x75 mm to 100x100 mm

VESA top position

44 cm

VESA adjustment function

Tilt: ±15°

Horizontal rotation: ±90°

vertical screen setup

Can

Single arm extension length

64 cm

Source : 2021/7/1 retrieved from walielectric.com

Product example of three-screen joint arm pyramid bracket

Self-standing monitor stand Three monitors Articulating arm Pyramid type Stand product example

Brand VIVO | Model STAND-V003E

Supported Screen Sizes

13 to 30 inches

Support screen weight (calculated separately)

1 to 10 kg

VESA standard mounting interface

75x75 mm to 100x100 mm

VESA top position

90 cm

VESA adjustment function

Tilt: ±15°

Horizontal rotation: ±180°

vertical screen setup

Can

Single arm extension length

50 cm

Source : 2021/7/1 retrieved from vivo-us.com

Product example of four-screen joint arm stand

Self-standing monitor stand Four monitors Articulating arm Stand product example

Brand VIVO | Model STAND-V004F

Supported Screen Sizes

13 to 30 inches

Support screen weight (calculated separately)

1 to 8 kg

VESA standard mounting interface

75x75 mm to 100x100 mm

VESA top position

90 cm

VESA adjustment function

Tilt: ±15°

Horizontal rotation: ±180°

vertical screen setup

Can

Single arm extension length

40 cm

Source : 2021/7/1 retrieved from vivo-us.com

Product example of four-screen joint arm pyramid bracket

Self-supporting monitor stand Four monitors Articulating arm Pyramid type Stand product example

Brand VIVO | Model STAND-V104B

Supported Screen Sizes

13 to 24 inches

Support screen weight (calculated separately)

1 to 7 kg

VESA standard mounting interface

75x75 mm to 100x100 mm

VESA top position

88 cm

VESA adjustment function

Tilt: ±45°

Horizontal rotation: ±90°

vertical screen setup

Can

Single arm extension length

66 cm

Source : 2021/7/1 retrieved from vivo-us.com

Product example of six-screen joint arm stand

Self-standing monitor stand, six monitors, articulated arm, stand product example

Brand VIVO | Model STAND-V006F

Supported Screen Sizes

13 to 24 inches

Support screen weight (calculated separately)

1 to 10 kg

VESA standard mounting interface

75x75 mm to 100x100 mm

VESA top position

72 cm

VESA adjustment function

Tilt: ±15°

Horizontal rotation: ±180°

vertical screen setup

Can

Single arm extension length

61 cm

Source : 2021/7/1 retrieved from vivo-us.com

Conclusion:

When purchasing armless or articulated arms, it is recommended to install screens of the same model, except that the specifications of the screen and bracket can match. When actually testing the air pressure arm screen mounts at different prices, the user experience is obviously different. Although the specifications or carrying weight are close, the touch, smoothness, and stability in actual use can only be experienced through personal use. An old saying goes:

YOU GET WHAT YOU PAY FOR!

Thank you for coming here, I hope you have your ideal screen setup in mind. Act now, choose the monitor stand that suits you best, optimize the work desk space, and improve work efficiency. If you have any questions about purchasing a monitor stand, please leave a message below or join the ULTRARM Line official account to ask, we will reply you within 24 hours.

Further reading :

11 questions you must read before buying a screen stand, so you can save money

7 Biggest Disadvantages of Screen Mount Products | 2021 Edition

The 12 most common screen bracket product recommendations | Clip table and perforated installation

If you like and want to receive the latest 3C product information, please subscribe to support us.

Related Posts

購買螢幕支架前必看的11個問題 讓你少花冤枉錢
March 12, 2023
11 Things You Should Know Before Buying a Monitor Arm

There are many details to consider before purchasing a monitor stand; how many monitors you have, how they should be...

Read More
12種最常見的螢幕支架推薦 | 夾桌及穿孔式安裝篇
March 12, 2023
12 Popular Types of Monitor Arms | C-clamp & Grommet Mount Edition

ULTRARM's editorial team has compiled a list of 12 types of monitor mounts on the market, based on the number...

Read More
Drawer Title

This website uses cookies to ensure you get the best experience on our website.

Similar Products